Best Guide For Concrete Polishing
One of the industries that have undergone great evolution is the polishing industry. The companies that are growing and those that are coming up now are too many in this industry. Still other companies will start as most people are getting into this industry. Quality concrete polishing can be done with the companies that apply the tips contained in this article. These tips are explained in this article.
The first thing that should be done in determining the surface hardness. A concrete hardness tester is the tool that is used for testing concrete hardness. This helps in making the decision on the right abrasives. The tip number nine is the one used for scraping first. Then the scratching is done in a descending order. This is done until the tip cannot do the scratching anymore. At this level, the level of hardness is ok.
Then the next thing is preparing the concrete surface. Sometimes one can get the coated floors. In this case, the right tools should be used in the removal of the coating. The type of coating is what affects the equipment to be used in the removal of this coat. Holes and cracks can be found in some floors that need to be polished. These holes and cracks should be repaired first. Then gritting is done with the metal bond tooling to a level and flatness that is appropriate.
Then the metal tool marks have to be removed. Transitional tooling can help here. The marks made by the tool can be removed very well with the use of transitional tooling. The process is considered successful when all the tool marks disappear.
Then densifying and hardening of the floor is done with the process of vacuuming. The appropriate tool for densifying and solidifying the surface of the floor is the pore and crack filler. Also vacuuming helps in protecting the floor from allowing water penetration and stain creation. A lot of care is needed so as the pooling does not result when using the floor densifiers. Pooling creates stains that can harden the process of polishing.
Then concrete polishing is done. Resign band tooling is appropriate to start with. Then all the dust is removed that is, the space is vacuumed in between the passes. Then the floor is burnished with a burnishing pad after the final grit level is achieved.
Then the last thing that should be done to the floor is protecting it. The floor get the protection by the sealing it. Some of the things that the floor is protected from are the grease, oil and any other chemicals. The pump can be used to apply the sealer to the floor. Then burnishing is done to ensure the floor shines. Successful concrete polishing can be done with the tips given.